To give us a try, book a free estimate below or simply give us a call on For more information or to schedule a free estimate, call us at or fill out the form below. Milford, CT Paint vs. Tips for Staining A painted Surface. Closing Thoughts. Are you planning to clean your home's exterior using a power washer? Here are 7 tips for power washing your home's exterior in Orange, CT.
Need Updated Kitchen Cabinets? Contact Us Name:. Are You a New Customer? Yes, I am a new customer. No, I am a current customer. Neither, I am messaging for something else. Thank you for contacting us. After sanding the wood, wipe it down with a tack cloth.
This will help remove any particles and residue left by the sandpaper. Make sure to use shellac or an oil-based primer when you paint over stained wood. Oil-based primers help protect wood surfaces better than water-based primers. When priming, use a foam brush and foam roller to get the best results. After your primed wood is fully dry, take a fresh tack cloth and wipe away any remaining wet spots.
Similar to Step 2, do not use a paper towel to wipe down the wood. After priming the wood, the next step is to paint it. Grab a fresh foam roller and apply at least three coats of either latex or oil-based paint. Oil-based paint is great for high traffic areas like decks and porches because it lasts longer and offers maximum protection.
Make sure to allow six hours of drying time in between coats of paint. During this time, inspect the wood for any clumped leftover paint residue that needs to be removed with a tack cloth before the paint dries completely. The best option is using a Polcrylic Protective Finish that can be applied with a cloth or aerosol spray, depending on the brand. Patience and attention to detail are two key factors essential to painting over stain the right way. If you plan on painting over stained wood yourself instead of hiring a contractor, follow the instructions perfectly, and make sure you have the right tools and materials for the job.
For best results when painting over stained wood, six-hour breaks are required in between each coat of paint. Continuously watch for defects and paint drops. The odor of stain can be unpleasant and even harmful in closed conditions. Lay a drop cloth under the item and extend the cloth a couple of feet beyond to catch stain splatter. Put on latex or nitrile gloves as wood stain is difficult to remove from hands.
If working on an item such as a dresser or nightstand, unscrew hardware, hinges, and all other items that will not be stained. Bag these items and their screws, label the bag with the indelible marker and set them safely aside. Experiment on a sample remote area since paint sheen and general surface conditions dramatically affect the outcome. Sanding the surface gives it more tooth, or porosity, to grab the stain.
Not all surfaces need to be sanded. This is done for decorative effect, not for durability, so sand as much or as little as you wish. Clean the surface with a clean cloth or tack cloth.
As with paint, stain carries pigments and must be thoroughly mixed. Stir the stain carefully with a clean wooden stirring stick. Since bubbles may form, let fifteen minutes pass before you begin using the stain. Stain quickly separates; be sure to thoroughly mix the stain before using. Gel stains are less viscous than conventional stains, making it easier to dispense the product on the surface and control drips. A little stain goes a long way, especially applied on these less absorbent painted surfaces.
Dip just the tip of the brush bristles in the stain. Transfer the brush to the painted surface, starting at one edge, and brush gently. If the desired effect is a dark stain, aim for multiple thin layers of the stain rather than one single thick layer. Stained surfaces tend to dry to touch within two hours.
0コメント